Datasheet

23/4/2015
IFRD 08P17A1/S35L
Inductive sensors special versions
Inductive sensors
www.baumer.com
general data
mounting type quasi-flush
special type full metal housing (DuroProx)
nominal sensing distance Sn 2 mm
hysteresis 2 ... 20 % of Sr
output indicator 3 port LED red
electrical data
switching frequency < 150 Hz
voltage supply range +Vs 10 ... 30 VDC
current consumption max. (no load) 20 mA
output circuit PNP make function (NO)
voltage drop Vd < 2 VDC
output current < 200 mA
short circuit protection yes
reverse polarity protection yes
mechanical data
type cylindrical threaded
material (sensing face) stainless steel 1.4404 (V4A)
housing material stainless steel 1.4404 (V4A)
pressure static < 20 bar
dimension 8 mm
housing length 46 mm
connection types connector M8
ambient conditions
operating temperature -25 ... +75 °C
protection class IP 68/67 (sensing face/sensor)
photo
connection diagram
output
+VS
PNP
BU (3)
BN (1)
BK (4)
Z
0 V
dimension drawing
34
46
M8 x 1
M8 x 1
3xLED
SW 13
• Higher noise immunity (EMC), (EN
61000-6-2)