Instruction Manual

Status / Status / Condition Code
Sensor voll funktionfähig (Objekt detektiert)
Sensor fully operational (object detected)
Capteur complètement opérational (object détecté)
100 ms grüne LED an / green LED on / LED verte alluminée
900 ms LED aus / o󰀨 / éteinte
Sensor voll funktionfähig (kein Objekt detektiert)
Sensor fully operational (no object detected)
Capteur complètement opérational (anun object détecté)
wie oben / as above / comme ci-dessus
zusätzlich / with additional / avec supplémentaire
100 ms gelbe LED an / yellow LED on / LED jaune alluminée
Elektronikfehler
Hardware fault
Défaut de matériel
50 ms rote LED an / red LED on / LED rouge alluminée
50 ms LED aus / o󰀨 / éteinte
CAN Abwurf (Fehlfunktion)
CAN bus o󰀨 (malfunction)
Arrêt du bus CAN (dysfonctionnement)
50 ms magenta LED an / on / alluminée
150 ms LED aus / o󰀨 / éteinte
Adresszuweisung fehlgeschlagen
Address claim failed
Assigment d‘ addresse failli
50 ms magenta LED an / on / alluminée
50 ms LED aus / o󰀨 / éteinte
Warten auf Adresszuweisung
Waiting for Master ECU adress claim
En attendre il assignment d‘ adresse du maître ECU
500 ms magenta LED an / on / alluminée
500 ms LED aus / o󰀨 / éteinte
Andere / other / autre blaue LED / blue LED / LED bleue
Grundinformation CAN - basic information CAN -
informations de base CAN
ISO Name
ISO name
Nom ISO
Manufacturer code:
ECU instance:
Function instance:
Function:
System:
System instance:
Industry group:
Arbitration capable:
343 (Baumer Group)
0
2
255 (non specic)
127 (non specic)
0
2
1
Geräteadresse
Device address
Adresse de l‘appareil
Unterstützt / supports „commanded address“ /
supporte adresse commandée (PGN 0xFED8)
im Bereich / in range / dans l‘ interval:
0x80 ... 0xCF (Standard / default / défault 0x80)
Zielabstand CAN Nachricht - target distance CAN message - Message CAN, distance des cible
PGN CAN Nachricht / CAN message / Message CAN : 0xC000
Start bit Bits Abstand
o󰀨set
décaillage
Skalierung
scaling
écaillage
Beschreibung / description / description
1 2 0 1 Sensorstatus / Sensor status / état de capteur
0 = Kein Fehler / no error / Pas d‘ erreur
1 = Reversibler Fehler / reversible error / erreur reversible
2 = Irreversibler Fehler / irreversible error / erreur irréversible
9 8 0 1% Kondenz Zielabstand / target distance condence /
condance en la distance par raportaux cible
0% ... 100%
17 24 0 0,1mm Zielabstand / target distance / distance des cible
49 16 32768 1mm/sec Zielgeschwindikeit / target speed / vitesse des cible
2/4
Visuelle Diagnose Visual diagnostic Diagnostic visuel
CAN Kommunikation - CAN communication - communication CAN
Für weitere Informationen lesen Sie bitte die Bedienungsanleitung - For further information please refer to the user manual - Pour plus d‘ informations, veuillez vous référer au manuel d‘ utilisation