Operating Manual

Manual R600V.DAH5 Multi-object (EN)
R600V.DAH5_multiobject_manual_1.1 (EN).docm Page 13 of 36
Last Update: 01 Jan 2021
2.2.2. Typical Detection Cone
The following figures show the detection cone for two exemplary target types: A steel round
bar with a 25mm diameter and a 100x100mm flat metal target. The measurement is done by
moving the object sideways into the beam at several distances. The edge position of the object
at which a measurement is possible is used.
Fig 7 Typical Detection Cone for 25mm round bar (object not to scale)
Fig 8 Typical Detection Cone for 100 x 100mm flat metal plate round bar (object not to scale)