Operating Manual

Manual R600V.DAH5 Multi-object (EN)
R600V.DAH5_multiobject_manual_1.1 (EN).docm Page 17 of 36
Last Update: 01 Jan 2021
Visual Diagnostic
High luminosity LEDs provide quick feedback on the operational status of the sensor. The
LEDs are positioned behind the radar lens and may be observed even in bright ambient light.
The following table indicates sensor status and LED blink codes.
Tab 5 Status Mapping (Visual Diagnostic)
Status
Code
Sensor fully operational (ob-
ject detected)
100ms Green LED ON
400ms LED OFF
Sensor fully operational, (no
object detected)
As above
100ms Yellow LED ON in “LED OFF” interval
Hardware fault
50ms Red LED ON
50ms LED OFF
CAN bus Off (malfunction)
50ms Magenta LED ON
150ms LED OFF
Address claim failed
50ms Magenta LED ON
50ms LED OFF
Waiting for Master ECU ad-
dress claim
500ms Magenta LED ON
500ms LED OFF
Other
Blue LED
ATTENTION
The product shall be appropriately protected by an extern fuse or R/C.
NOTE
For test installations a cable with the order code 11213075 (ZCABL-
ALL.AMP0300) may be used.