Operating Manual

Manual R600V.DAH5 Multi-object (EN)
Page 4 of 36 R600V.DAH5_multiobject_manual_1.1 (EN).docm
Last Update: 01 Jan 2021
General Information
Scope
This manual is intended for the Baumer “Off-highway Multi-object Radar Sensor”. The sensors
and their software configuration are listed below:
Tab 1 Applicable Products
Art. no.
Product
Type
SW Version
11221283
R600V.DAH5-11221283
Multi-object distance radar
R600VM8F_S(1.0) (or higher)
Comments, notes, and warnings
Intended Use
1.3.1. General
The “Off-highway Multi-object Radar Sensor” has been developed with the off-highway market
(agriculture vehicles, construction vehicles, etc.) in mind. It is intended for use cases in which
multiple objects may be seen at a time, highly fluctuating environments and for applications
that do not fit special purpose applications as outlined below. This sensor allows for advanced
customer side filtering of raw data and customer value creation.
For highly structured surfaces (rough terrain, stubble, etc.) and situations in which the distance
to ground and crop need to be measured, Baumer recommends the usage of “Off-Highway
Ground & Crop Radar Sensor” family (R600V.DAE0-11209335, R600V.DAE0-11188367). For
flat and unstructured surfaces (e.g. asphalt, concrete) the usage of the “Off-Highway Distance
Read this operating manual carefully and follow its safety instructions!
NOTE
Provides helpful operation instructions or other general recommendations.
ATTENTION
Indicates a possibly situation that may lead to damage.
CAUTION
Indicates a possibly hazardous situation. If it is not avoided injuries may
occur or the device be damaged.