Owner manual

EtherCAT 18/42 Baumer Thalheim GmbH & Co. KG
2011-10-04/rnik Eschwege, Germany
0x2 -
0x4 Optic chip (ADC, EEPROM, SI)
0x8 Temperature error (over / under)
Table 20 Manufacturer specific warnings
2.4.1.18 Object 0x6508 Operating Time
This object provides the devices operating time. It will be incremented in steps of 0.1 h. Operating time peri-
ods of less than 0.1h are not counted.
2.4.1.19 Object 0x6509 Offset Value
This object provides the offset value. The offset value is calculated via the preset object input data (0x6003)
and shifts the position value with the calculated value. This object data is stored non-volatile immediately
after any change to the Object Preset Value.