User Manual

ManualsBrandsBaumer ManualsMeasuring instrumentsCombiTemp

Page 1 Design and speciﬁ cations subject to change without notice

Installation Manual 5850-008www.baumerprocess.com

CombiTemp comprises a series of basic elements which can be

combined to various temperature sensors and transmitters. Being a

building block system CombiTemp offers a great ﬂ exibility in respect to

modiﬁ cation, service and maintenance.

The basic components in the system are:

Housing: DIN-formB or Ø80mm stainless steel

Process connection: Refer to the data sheet

FlexTop transmitters: 2201, 2211, 2221, 2231

FlexView 4...20 mA LC-display

BattTemp, Battery operated Pt100 LC-display

The parts can be assembled by the user or delivered assembled and

calibrated, if relevant. However, an Ex ia or Ex n approved product will

always be assembled at the factory.

All documentation can be found at www.baumerprocess.com

Please refer to the relevant data sheets and installation manuals for

each product:

Product Data Sheet Manual

CombiTemp 2000-1 This manual

FlexTop2201 2201-1 2201-8906

FlexTop2211 2211-1 2211-8900

FlexTop2221 2221-1 2221-8900

FlexTop2231 2231-1 2231-8900

FlexView 9401-1 9401-8904

BattTemp 2400-1 2400-8900

CombiTemp Temperature Measuring System

Description

This Ex-approved product is manufactured by:

Baumer A/S

Jacob Knudsens Vej 14

DK-8230 Aabyhoej

Denmark

Housing

Transmitters

Displays

The process connections shown

are examples.

FlexView BattTemp

DIN-B

Standard or

Ex ia safety

Ø80 mm

stainless steel

FlexTop 2201 FlexTop 2211 FlexTop 2221 FlexTop 2231

DIN-B

Ex n safety

Summary of content (8 pages)

PAGE 1
CombiTemp Temperature Measuring System Housing DIN-B DIN-B Standard or Ex ia safety Ex n safety Ø80 mm stainless steel Transmitters FlexTop 2201 FlexTop 2211 FlexTop 2221 FlexTop 2231 Displays The process connections shown are examples. FlexView BattTemp Description CombiTemp comprises a series of basic elements which can be combined to various temperature sensors and transmitters.
PAGE 2
Technical Data, General Environmental conditions Sensor tube and connection Media temperature, std. -50...400°C Material Surface sensor -40...150°C Ambient temperature -40...160°C Acid-proof, stainless steel (AISI 316L/W.1.4404) Media pressure Max. 16 bar (or max. temperature range for display/transmitter) Time constant t0.5 See table below Humidity Mechanical tolerances ISO 2768-m < 100% RH, condensing (or max.
PAGE 3
Dimensional Drawings - Mounting Details [mm] 76 85 71 7.5 12.5 Male Nipple G1/2A mounted on DIN B housing Male Nipple G1/2A 11 Male Nipple G1/2A mounted on ø80 mm housing Sensor inserts Calculation of insert length: When ordering an insert the length must be calculated from the formula: Housing shaft {8} Total body length Insert length = Sensor length + total body length + housing shaft (Total body length can be calculated from the dimensional drawings on pages 6 and 7) Sensor length (L) Example.
PAGE 4
Technical Data, Ex ia IIC T4/T5, ATEX II 1G Approval Product Identification Ex- data for the below listed configuration The label at the product will show the type no. like this: Ø80 housing: BattTemp 814x xxxx xxxx xx4 xxxx + xxxx xxxx + xx xx-xxx Temperature class CombiTemp no. + FlexTop no. + FlexView/BattTemp no. Battery: Energizer Lithium FR6 L91 AA The complete configuration will be referred to as CombiTemp. A CombiTemp with a type no.
PAGE 5
Technical Data, Ex nA II T4/T5, ATEX II 3G Approval Product Identification Ex- data for the below listed configurations The label at the product will show the type no. like this: Ø80 housing: BattTemp 814x xxxx xxxx xx5 xxxx + xxxx xxxx + xx xx-xxx Temperature class CombiTemp no. + FlexTop no. + FlexView/BattTemp no. Battery: Energizer Lithium FR6 L91 AA The complete configuration will be referred to as CombiTemp. A CombiTemp with a type no.
PAGE 6
Mounting the ø80 mm Housing 35 Nm 2 Nm www.baumerprocess.
PAGE 7
Mounting the DIN-B Housing 2mm 2 Nm 35 Nm www.baumerprocess.
PAGE 8
4-wire Sensors White White Double Elements Red Red White White Red Red Warning: One of the wires may not be connected in case of a 3-wire connection to the temperature transmitter ø80 mm housing with FlexView Gland (blind plug at the rear) Clamp connection Fast response sensor Cut through DIN - B housing FlexTop 2201 temperature transmitter G1/2A male nipple connection Normal response sensor www.baumerprocess.