Instruction Manual

Manual_GXP8W_EN.doc 7/13 Baumer IVO GmbH & Co. KG

04.05.11 Villingen-Schwenningen, Germany

6. E/A Entities/Assembly

The encoder supports 2 E/A Entities/Assembly. The entity is designated by the entity attribute 14

(produced_connection_path) of the connection object. The programmed value is automatically stored in the

non-volatile memory (service “save” here is not necessary).

Entity default setting: 1.

The encoder provides following data which are input data from the Master’s point of view.

entity type name

1 input position value

2 input position value & warnflag & alarmflag

E/A Assembly data attributes format

E/A Assembly data attributes are of the following format:

entity Byte Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0

1 0 Position value LSB

1 Position value

2 Position value

3 Position value MSB

2 0 Position value LSB

1 Position value

2 Position value

3 Position value MSB

reserved

Warn-

Flag

Alarm-

Flag

Examples:

Path entity 1 (in hex): „20 04 24 01“

Path entity 2 (in hex): „20 04 24 02“