Datasheet

Illumination / Illumination accessories
Multi headed cable Type E2
Split cable for illumination
Article number: 11701465
overview
■
Split cable M12/12-pin female connector to 1x M8/3-pin male con-
nector (to power the camera and I/Os, enable hardware trigger via
input) and 2x M8/4-pin female connectors for two illuminations
■
The I/O voltage is directly distributed to the illuminations.
■
Protection class IP65/IP67
■
Length 100 cm (M12/12-pin cable 80 cm, M8 cables 20 cm)
technical data
electrical data
number of poles 12
connectors M12/12-pin female connector
M8/3-pin male connector
2x M8/4-pin female connector
mechanical data
dimensions distribution part 50 mm x 26 mm x 13 mm
smallest bending radius
static
42,5 mm (cable with M12/12-pin female
connector)
22 mm (cable with M8/3-pin male con-
nector)
22 mm (cable with M8/4-pin female con-
nector)
smallest bending radius
moved installation
85 mm (cable with M12/12-pin female
connector)
44 mm (cable with M8/3-pin male con-
nector)
44 mm (cable with M8/4-pin female con-
nector)
mechanical data
bending cycles M12: 2.000.000
M8: 10.000.000
use in cable carriers yes
cable length [m] 1 m
conductor cross-section 12 × 0,14mm²
3 × 0,25mm²
4 × 0,25mm²
material TPU
PUR, halogen-free
environmental conditions
operation temperature
(moved installation)
-5 … +75 °C
operating temperature -25 … +75 °C
protection class IP 65/67 (mounted)
2020-09-02 The product features and technical data specified do not express or imply any warranty. Technical modifications subject to change.
www.baumer.com Data sheet – Multi headed cable Type E2 Page 1 of 3