Instruction Manual

N 143
www.baumer.com 29
7. Technical data
7.1. Technical product specifications
Electrical data
Supply voltage 24 VDC ±10 %
Current consumption <40 mA
Display 7-segment LCD, 2 lines, backlit
Measuring principle Absolute multiturn measuring system
Measuring range -999,99...+9999,99 mm
-99.999...+999.999 inch
Resolution/ steps per turn 2304
Number of turns/resolution 4096 / 12 Bit
Spindle pitch ≤23 mm
Interface RS485 (ASCII protocol)
Data memory Parameter buffer: EEPROM
Current value buffer: >10 years by integrated 3 V Lithium cell
Programmable parameters Display position horizontal/vertical mounting
Measuring unit mm/inch
Counting direction
Pitch
Backlash
Positioning direction
Direction arrows
Tolerance window
Rounding functionality
Motive positioning Two buttons with optional microstep operation for position alignments
by power tool via infrared interface
Standard DIN EN 61010-1 Protection class II
Overvoltage category II
Soiling degree 2
Emitted interference DIN EN 61000-6-3
Interference immunity DIN EN 61000-6-2
Certificates UL/cUL
Mechanical data
Hollow shaft ø25 mm
Rotational speed ≤600 rpm (short-term)
Protection DIN EN 60529 IP 65 (housing), IP 40 (connector)
Ambient temperature -10...+50 °C
Storage temperature -20...+70 °C
Relative humidity 80 % non-condensing
Torque support Torque pin provided at housing
E-connection Cable output (30 cm) with 5-pin mating connector M16
User interface / keypad Two keys on keypad
Housing With hollow shaft
Dimensions W x H x L 56 x 100 x 62.5 mm
Mounting Hollow shaft attachment
Weight approx. 200 g
Material Polycarbonate black, UL 94V-0