User guide

Safety
Further Information
For further information on our products visit www.baumer.com
For technical issues, please contact our technical support:
[e-mail] · Phone [phone] · Fax [phone]
© Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter not guaranteed.
Subject to change without notice. Printed in Germany 07/13. v1.3 11054358
FCC – Class B device
No t e : This equipment has been tested and found to
comply with the limits for a Class B digital device, pursu-
ant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interfer-
ence in a residential environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructios,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occure in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off an
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna. ▪
Increase the separation between the equipment and the ▪
receiver.
Connect the equipment into an outlet on a circuit different ▪
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician ▪
for help.
Conformity:
CE, FCC Part 15 Class B, RoHS
Safety instructions
Notice
See User´s Guide for the com-
plete safety instructions!
Protect the sensor from dirt and ▪
moisture.
Never open the camera housing. ▪
Avoid camera contamination by ▪
foreign objects.
Environmental requirements:
Storage temp. -10°C ... +70°C
Operating temp. +5°C ... +60°C
Housing temp. max. +60°C
Humidity 10 % ... 90 %
non condensing
Quick Start Guide
SXG cameras with Kodak sensors
Product Specication
SXG cameras – Maximum Performance with Kodak sensors
Dual Gigabit Ethernet progressive scan CCD camera ▪
Compact and lightweight aluminium housing ▪
Power over Ethernet support ▪
Standard RJ45 connector ▪
GigE Vision ▪
TM
standard compliant
Excellent image quality at high image rates ▪
Resolutions of 1, 2, 4 or 8 megapixel ▪
Frame rates up to 120 fps ▪
Compact design (52 x 52 x 72 mm) ▪
Camera Type
Sensor
Size
Resolution
Full Frames
[max. fps]
Monochrome
SXG10 1/2" 1024 x 1024 120
SXG20 2/3" 1600 x 1200 68
SXG21 2/3” 1920 x 1080 64
SXG40 1” 2336 x 1752 32
SXG80 4/3” 3296 x 2472 16
Color
SXG10c 1/2” 1024 x 1024 120
SXG20c 2/3” 1600 x 1200 68
SXG21c 2/3” 1920 x 1080 64
SXG40c 1” 2336 x 1752 32
SXG80c 4/3” 3296 x 2472 16
Installation
open wire
Installation sample without PoE
1 - network interface card
2 - network cable
3 - Process interface cable
4 - Power cable
Dimensions (11047092)
● SXG-F (F-Mount version)
26 36
26 36
16 x M 3 de pth 6
UN C 1/4-20
52
52
26 36
72
Dimensions (11047091)
● SXG (C-Mount version)
26 36
26 36
16 x M3 depth 6
UNC 1/4-20
52
52
26 36
72
open wire
open wire
open wire
open wire
5
4
Installation sample with PoE via NIC
1 - PoE network interface card (NIC)
2 - network cable
3 - Process interface cable
Notice
Operation with a single GigE link is
possible as well.
Installation sample with PoE via Injector
1 - network interface card (NIC)
2 - network cable
3 - Injector
4 - network cable
5 - Process interface cable
Latest software version and technical
documentation are available at:
www.baumer.com/vision/login