Owner manual

TP10583 PAGE 22
Repeat as desired for each pan. Use the button to go to the production screen when ready.
27. Setup Preferences Screen:
To access the Setup Preferences Screen, first use the button from any screen to access the Main
Screen (shown below):
Then select the
Setup Preferences button to display Setup Preferences Screen (shown below):
The two lower buttons toggle the sensors into and out of bypass when they are pressed. The Input Sensor is
used to count, so the counts will not be correct when bypassed. The Exit Sensor triggers the jam error, so there
will be no warning for a jam when this is bypassed. This option is intended to be used when a sensor is bad and
a replacement is on order.