Datasheet
6-166-11
type 660.5, 665.6
With its overall height of 55, 60 or 64 mm it is an ideal counter program for DIN rail
mounting. A part of these AC or DC counters are produced with two decimals and
special terminals (lift principle) values in just one single housing.
Find pulse counter as single counter on page 7-1.
counting range overall height in mm terminal “Lift“-terminal
55 60 64 connection connection
99999,9 h
99999,99 h
99999,99 h
AC DC
660.5 665.5
661.6 666.6
661.7 666.7
type 661.6, 661.7,666.6, 666.7
housing:
gearing:
counting range:
digits:
voltages:
special voltages:
(additional charge)
voltage tolerance:
frequency:
current consump.:
protection
(front):
ambient temp.:
stocking temp.:
elec. connection:
(see table above)
vibration resist.:
shock resistance:
EMC:
industrial norm:
reset:
weight:
approval:
fixing:
AC DC
plastic light grey RAL 7035 plastic light grey RAL 7035
plastic plastic
see table above see table above
1,8 x 3,6 mm, white on black, 1,8 x 3,6 mm, white on black,
Decimals black on white Decimals black on white
115 or 230 V AC 12 - 24 V DC
12, 24, 48, 400 V AC
± 10 % ± 10 %
50 or 60 Hz (on request 20 to 100 Hz)
approx. 5-15 mA approx. 5-15 mA
IP 65, screws IP 20 IP 65, screws IP 20
- 10° C to + 70° C - 10° C to + 70° C
- 40° C to + 80° C - 40° C to + 80° C
Terminal Blocks (lift principle) with Terminal Blocks (lift principle) with
Philips-Head-Screw (+/- screw) in Philips-Head-Screw (+/- screw) in
combination with slotted screw combination with slotted screw
with 3 mm screwdriver size, 0-2.5 mm
2
with 3 mm screwdriver size, 0-2.5 mm
2
fine wire or 0-4 mm
2
single wire fine wire or 0-4 mm
2
single wire
1 g (10...500 Hz) acc. to EN 60068-2-34 1 g (10...500 Hz) acc. to EN 60068-2-34
30 g (18 ms) acc. to EN 60068-2-27 30 g (18 ms) acc. to EN 60068-2-27
25 g (6 ms) acc. to EN 60068-2-29 25 g (6 ms) acc. to EN 60068-2-29
EN 55011, EN 61000-6-2 EN 55011, EN 61000-6-2
EN 61010, protection class II EN 61010, protection class II
without without
approx. 75 g approx. 75 g
snap-on fixing for DIN-rail snap-on fixing for DIN-rail
according to DIN EN according to DIN EN
Technical specifications:
Drawings:
type 661/666 type 660/665
type 661/666
Electromechanical hour counters
register operating and service times.
Hour counter for DIN rail mounting, for AC or DC, overall height: 55, 60 or 64 mm