Operating instructions
11
912.808.1 - IT
INSTALLATION AND OPERATING MANUAL
0607_0201 / CR_0029
Figure 2: Casing/template
CASING/TEMPLATE MODEL WIDTH SIRIUS SAT MODELS
SINGLE-ZONE SIRIUS SAT KIT l = 600 mm R/1 - RP/1 - RS - RSP
DUAL-ZONE SIRIUS SAT KIT l = 800 mm R2Z - R2Z
Install the SIRIUS SAT model inside the casing/template supplied in a separate pack.
Make sure the template casing model is correct (L= 600 or L=800 mm).
Fit the template/casing in a niche in the wall made for this purpose (dimensions indicated in gures 2 and 3) and secure it
with the relative lateral bent pins. Make sure the installation allows easy access for maintenance.
Remove the door and white frame and put back after installation (make sure the casing accessories also include the key
for opening the door).
The frame can be depth-adjusted by using the 4 buttery nuts located in the side guides. It is therefore possible to t the
frame ush against the plaster and remove it when painting the wall.
Assemble the system starting from the position of the water connectors on the lower crossbar of the template (recessed
into the casing by 30 cm). Install the casing in the stairwell outside the apartment to heat.
4. MOUNTING THE TEMPLATE CASING
SINGLE-ZONE SIRIUS SAT KIT
DUAL-ZONE LUNA SAT KIT
L = 600
H = 650
P = 150
L = 800
H = 750
P = 150