Operating instructions
30
912.808.1 - IT
INSTALLATION AND OPERATING MANUAL
SWITCHES 4 – 5 : CLIMATE CURVE SELECTION (only for models RSP-R2Z-RS2Z))
Climate curve selection table
CLIMATE CURVE Switch 4 Switch 5 Temperature range
LOW OFF OFF 25 ÷ 40 °C
MEDIUM ON OFF 50 ÷ 60 °C
HIGH (*) OFF ON 25 ÷ 80 °C
(*) factory setting
The high curve should be selected for heating elements at high temperatures: radiators
The medium curve should be selected for heating elements tted with fans: fan coil units
The low curve should be selected for heating elements at low temperatures: underoor or similar systems.
0902_0820 / CR_0028
For dual-zone models (R2Z – RS2Z), the choice of the climate curve only applies to the mixed zone. The other zone works
directly with the temperature of the inlet water from the centralised system.
Figure 13 D: Climate curve selectors
High climate curve
Medium climate curve
Low climate curve