Installation manual

41 369622 09.09
Programming
Press heating circuit operating mode button to return to the basic display
By pressing the ESC button, you can return to the previous menu point without
adopting previously changed values. If no new settings are entered within a
period of 10 minutes, the basic display will automatically be called up, without any
previously changed values being adopted.
9.3 Table of settings
- Not all the parameters shown on the display are given in the settings table.
-Depending on the system configuration, not all the parameters shown in the
settings table will also be shown on the display.
-To view the setting levels for the end user (E), maintenance technician (I) or
technical expert (F), please press the OK button, followed by the info button
for about 3 seconds. Select the desired level using the rotary button and
confirm by pressing the OK button.
Table 2: Parameter settings
Function Prog.
No.
Setting
level
1)
Standard value
Time and date
Hours / minutes
Day / month
Year
Start of summer time
End of summer time
1
2
3
5
6
E
E
E
E
E
00h00 (h, min)
01.01 (day.month)
2004 (year)
25.03 (day.month)
25.10 (day.month)
Operating unit
This parameter is only visible on the indoor device!
Language
Info
Temporary / permanent
Display contrast
Operating lock
Off / On
Programming lock
Off / On
Save basic settings for operating unit
No / Yes
This parameter is only visible on the indoor
device!
Activate basic settings for operating unit
No / Yes
For use as
Indoor device 1 / Indoor device 2 / Indoor device
P / Operating device / Service device
This parameter is only visible on the indoor device!
20
22
25
26
27
30
31
40
E
F
E
F
F
F
F
I
German
Temporary
-
Off
Off
No
No
Indoor device 1
Status of Heat Pump
Off