Unit installation

To turn off the main burner and pilot.
 Turn the right hand control knob to the pilot position marked . Push the
knob in at this position and turn to the off position marked
•
.
CLEANING YOUR FIRE
Turn the fire off and allow it to cool completely before attempting any cleaning. Note
that the fire will retain heat for some time after it has been turned off.
Metal parts.
Clean the metal parts with a slightly damp cloth and then dry. Do not use abrasive
cleaners, they could scratch the surface.
SERVICING AND MAINTENANCE
Regular maintenance.
In order to achieve and maintain high levels of personal safety and performance
efficiency it is essential that the flue terminal outside the building is kept clear of any
form of obstruction.
We recommend that all gas appliances and their flues are checked annually by a
competent person (In the UK a GAS SAFE REGISTER engineer, Outside of the UK a
CORGI or GAS SAFE REGISTER engineer).
In the United Kingdom it is the law that a landlord must have any gas appliance, flue
and pipework which is situated in a tenant’s premises checked for safety at least
every twelve months.
Battery replacement.
This appliance uses four 1.5V AA
batteries.
 To change the batteries remove
the bottom front casting / fire front.
Remove the fire front as described
previously in this guide.
 The battery case is at the right
side. Lift the plastic battery holder
out of the metal case and detach
the batteries (See figure 5).
 Discard the old batteries and
replace with new ones.
 Replace the firefront.
Page 52
© Baxi Heating U.K. Limited 2009.
OWNER GUIDE
Figure 5. Battery replacement