Technical data

Brazilia F5, F5S & F8S Baxi Heating Ltd.
9
3.0 Site Requirements – Page 9
3.5 Ventilation
1. The appliance is room sealed and therefore requires no
purpose built ventilation.
2. It is intended for use in habitable rooms, and must not be
filled in cupboards or confined compartments.
3.6 Gas Supply
1. The inlet connection R ¼ (¼ BSP external) is located on
the gas tap at the bottom right hand side of the appliance.
2. A gas service cock must be filled in the supply to the
appliance with a disconnecting union between the service
cock and the inlet connection.
NOTE: If the gas supply is run either to the left or right
on leaving the appliance, at least the first 51mm (2 in)
from the inlet connection must run vertically downwards
to avoid the outer case fouling the gas supply.