Technical data

1.0 Introduction

1.1 Description

1. The Baxi System 100 HE Plus is a gas fired room sealed fan

assisted condensing central heating system boiler.

2. The maximum output of the boiler is preset at 75,000

Btu/hr. The boiler will automatically adjust down to 30,000

Btu/hr according to the system load. If required, the output

can be set to 100,000 Btu/hr. Please refer to section 8.7.

3. It is designed for use on Natural Gas (G20).

4. The boiler is suitable for sealed central heating and

domestic hot water systems.

5. A label giving details of the model, serial number and Gas

Council number is situated on the rear of the lower door

panel (Fig. 1).

6. The boiler data badge is positioned on the air box door

(Fig. 2).

7. The boiler is intended to be installed in residential /

commercial / light industrial E.M.C. environments on a

governed meter supply only.

8. The boiler must be installed with one of the purpose

designed flues such as the standard horizontal flue kit, part n

236921.

1.2 Important Information

Man-made mineral fibre

• Some component parts of this appliance (insulation pads,

gaskets and rope seals) are manufactured from man-made

mineral fibre.

• Prolonged or excessive exposure to this material may

result in some irritation to the eyes, skin or respiratory tract.

• It is advisable to wear gloves when handling these items.

• Irritant dust will only be released from the items if they are

broken up or subjected to severe abrasion. In these instances

a suitable dust mask and goggles should be worn.

• Always thoroughly wash hands after installation, servicing or

changing components.

• When disposing of any items manufactured from man-

made mineral fibre care must be exercised.

• If any irritation of the eyes or severe irritation of the skin is

experienced seek medical attention.

NOTE: All illustrations show the PCB Connection

Cover removed unless otherwise shown.

Fig. 1

Data Badge

Air Box Door

Lower Door Panel

Fig. 2

Label