Owner's Manual

4.0 User Controls

4.3 Menu “Programming”

All adjustable parameters can be checked in this menu and, if

necessary, changed. The default factory setting will usually give

efficient and problem free operation. However Baxi recommend

the following parameters marked * must be left at the default

settings. Any change to the Baxi recommended settings will

invalidate the warranty.

Indication Description Value range Defaults

max Storage 1/2: 15..65ºC 65ºC *

65ºC Maximum temperature

dT max Storage 1/2: Hysteresis (dT on) * 3..40 K 7 K

7 K

dT min Storage 1/2: Hysteresis (dT off) * 2..35 K 3 K

3 K

min Setting the speed control of the pump 30%..100% 100%

100 100% = speed control off

min Temperature start for the function 20..90ºC 40ºC

40ºC heating

dT Hysteresis heating 1..30K 10K

10K

Press or to scroll

up or down to the required sub function.

The icon will flash, press to

select the function. Reset by pressing

or for

increase/decrease values. Press

and appears,

press to confirm and

disappears.

ok?

* Temperature lag between switch on and switch off