Owner's Manual

ManualsBrandsBaxi ManualsHeating SystemSolarflo

4.0 User Controls

The controller will display certain information in the event of some system faults. The following table indicates these and will aid in describing the

nature of the fault to the Service Engineer. DO NOT attempt to rectify faults yourself, contact Technical Enquires on 0844 871 1555 or a qualified

Solar water heating engineer.

Error representation on display Possible reasons

flashing

• Sensor wire broke

• Sensor defect

flashing

• Short circuit in sensor wire

• Sensor defect

• Error in pump connection

• Pump defect

• Air in the system

• Connection with flow

meter defect

• Sensor wire broken

• Sensor defect

• Go back through menu to

identify fault or contact

Technical Enquires

Circulation error: no flow

Additionally at energy

productivity measurement:

flashing

Status indication

Solar circulation pump Symbol revolves when solar circulation pump is on

Switch output 1 is active Appears when switch output 1 is active (on)

Switch output 2 is active Appears when switch output 2 is active (on)

Switch output 3 is active Appears when switch output 3 is active (on)

Reference to system fault Display flashes when a fault occurs in the system

Safety query for value changes which are to be stored

Input value can be either

rejected or accepted

ok?