Owner's Manual

5.0 Important Notes

If the system pressure falls to zero, switch off the power supply

to the Solar Controller and contact a qualified solar heating

engineer.

Familiarise yourself with the controls and instructions supplied

with the Solar Cylinder and follow manufacturer’s instructions

in the event of a cylinder fault.

The pipework between the solar collector(s) and the solar

cylinder can be very hot. These pipes should have been

insulated by the installer. This is high temperature insulation. In

the event of damage contact Technical Enquiries.

If the electrical supply for the Solar domestic hot water heating

system is interrupted it will not operate. However, programme

settings are stored by the controller and should not need

resetting when power is restored.

The Solar Controller may have been integrated with the

auxiliary heating controls to optimise the solar gain from the

system and minimise the use of the auxiliary heat source. Your

installer should explain how the system will function in this

event. The Solar Controller will not control the space (central)

heating system, separate controls are necessary for this

function. Refer to the instructions supplied with any separate

auxiliary controls for details of their correct setting.