Installation Manual

Read this instruction carefully. See hardware and furniture part list for guidance.

Be sure all parts are complete, before you assemble. Place all wooden furniture

parts on a clean and flat soft surface to prevent from being scratched.

Follow the figure to start assembling.

CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.

2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.

3. Keep all hardware parts out of reach of children.

NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.

Tool needed : Screwdriver (not provided).

ASSEMBLY INSTRUCTIONS

MODEL : BBT 5199 ROCKING CHAIR

HARDWARE LIST

ITEM DESCRIPTION

QTY

1 JCBB BOLT M8 x 50mm

6pcs

2 JCBB BOLT M8 x 60mm

2pcs

M8 SPRING WASHER

8pcs

4 WOOD SCREW M4 x 38mm

4pcs

5 WOOD DOWEL M8 x 35mm

8pcs

M5 ALLEN KEY (BALL SHAPE) 1pc

PART LIST

ITEM DESCRIPTION

QTY

CHAIR 1 PC

CHAIR LEG (L)

1 PC

CHAIR LEG (R)

1 PC

FRONT RAIL 1 PC

BACK RAIL 1 PC

BOTTOM RAIL 1 PC

STEP 1

1 of 2

STEP 2

PAGE 1
ASSEMBLY INSTRUCTIONS MODEL : BBT 5199 ROCKING CHAIR Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling. CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed. 2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 3 2 of 2 STEP 4 6 B 6 1 3 C x2 2 3 A 6 1 3 C STEP 5 STEP 6 6