0068 4D Full Bed Assembly Instructions WI-1220 1 Assembled View Use 2 People Note: Do not assemble using power tools.
0068 4D Full Bed Assembly Instructions WI-1220 3 Hardware List 1 5 9 2 M4 Allen Key x1 6 Wheel x 16 7 Wood Dowel (M8 x 30mm) x 48 Wood Screw (M4 x 32mm) x 68 10 12 3 Center Rail Bracket x 2 M6 x 90mm JCB x8 4 Adjustable Foot x 3 Wood Dowel (M10 x 40mm) x4 8 Wood Screw (M4 x 16mm) x 64 11 M6 x 15mm JCB x4 13 Barrel Nut x 11 M6 x 40mm JCB x 18 M6 x 100mm JCB x3 4 Fix the Adjustable foot to the bottom of the Support Leg (E).
0068 4D Full Bed Assembly Instructions WI-1220 5 Assemble the Drawer Side (K) and Drawer Rail (L & M) to the Drawer Back (J). x4 9 J K 9 6 6 L 6 M Note: Extra Holes underneath 6 K 6 L Note: Extra Holes underneath 6 Slide the Drawer Bottom (H) onto the groove on the Drawer Sides (K).
0068 4D Full Bed Assembly Instructions WI-1220 7 Assemble the Drawer Face (G) to the Drawer Sides (K). K x4 J 9 K G 9 8 Turn the Drawer over to fit angled 32mm Wood Screws (9) to the Drawer Rails (L & M). G 9 9 9 L M L J K 9 Fit the Wheels (5) to the Drawer Rail (L).
0068 4D Full Bed Assembly Instructions WI-1220 10 Fit the Center Rail Bracket to the Headboard Panel (A). Note: Extra Holes on the outside A 10 Short Tab of Metal Bracket (2) 11 Fit the Center Rail Bracket to the Footboard Panel (B).
0068 4D Full Bed Assembly Instructions WI-1220 12 Assemble the Side Rail (C) to the Head / Footboard Panel (A & B). 7 C A/B 12 4 A C C B 13 Bolt the Long Support (D) to the Center Rail Brackets on the Head / Footboard Panel (A & B).
0068 4D Full Bed Assembly Instructions WI-1220 14 Fit the first 3 Slats and assemble the Support Leg (E) to the Bed Slat (F). Bolt & screw the Bed Slats (F) 13 to the Side Rail (C) & Long Support (D). 11 11 9 F 9 C D E C 4 15 Fit the other Slats out and assemble the Support Leg (E) to the Bed Slat (F). Bolt & screw the Bed Slats (F) to the Side Rail (C) & Long Support (D).
0068 4D Full Bed Assembly Instructions WI-1220 16 Fit the other Slats out and assemble the Support Leg (E) to the Bed Slat (F). Bolt & screw the Bed Slats (F) to the Side Rail (C) & Long Support (D). 9 11 9 11 F 13 11 3 13 C 9 9 B 4 E 17 Bolt & screw the remaining Bed Slats (F) to the Side Rail (C). C Finally fit the assembled Drawers.