9005 4 Drawer Chest Assembly Instructions WI-0222 Use 2 People Note: Do not assemble using power tools.
9005 4 Drawer Chest Assembly Instructions WI-0222 1 Parts List Parts in Box B: J K Drawer Face x 4 Drawer Side L Drawer Back x 4 Drawer Rail x 4 Drawer Side M (Left Hand) x 4 N (Right Hand) x 4 2 Hardware List M6 x M6 x 1 15mm JCB x 16 x8 M4 x 32mm 6 Wood Dowel x 12 Spring 7 M4 x 25mm 3 Wood Screw 4 Wood Screw CSK Cap Wood Screw (M6 x 50mm) x 4 8 (5005-3) x 8 x 16 M6 x 25mm 5 Wood Screw 9 Washer x 8 M4 x 20mm 2 60mm JCB x 40 'L' Bracket x 16 10 Flat Washer x8 M4 x 18mm
9005 4 Drawer Chest Assembly Instructions WI-0222 4 Slide the Drawer Bottom (H) into the groove on the Drawer Sides (M & N). x4 J N H M 5 Assemble the Drawer Back (K) to the Drawer Sides (M & N). N 4 K 4 M 6 Turn the Drawer over to fit angled 25mm Wood screws (4) to the Drawer Rail (L).
9005 4 Drawer Chest Assembly Instructions WI-0222 7 Fit the 'L' Bracket x8 to the Side Panel (F & G). 1 8 F Bottom holes to assemble Bottom Panel G Bottom holes to assemble Bottom Panel x4 8 Assembled the Top Panel (A) & Bottom Panel (B) to the Side Panel (F & G). Back Rail facing back 1 G Rail facing back Important: Drawer Runner facing front.
9005 4 Drawer Chest Assembly Instructions WI-0222 9 Fit the Support Bar (E) to the Back Side Panel (F & G) as shown. x4 E A G 1 F B E 10 Attached the Back Panel (C) to the back of the frame.
9005 4 Drawer Chest Assembly Instructions WI-0222 11 Turn the chest over to fit the Post (D) to the Bottom Panel (B). D B D 10 9 D B 2 A 12 Fit and adjust the Drawer Face (J). Before fitting the Wood Screws. * NOTE: Lossen the JCBs on the Drawer Face if the face needs alignment.
9005 4 Drawer Chest Assembly Instructions WI-0222 13 After the Drawer Faces (J) are aligned, secure with wood screws. J J 3 3 3 3 J Back 14 Finaly, fit the Handle to the Drawer Face (J).
