Manualshelf

Owner`s manual

ManualsBrandsBay Controls ManualsConsumer electronicsBW-WT2
11121314151617181920
Operation
Using the Thermostat Keypad
The Thermostat Keypad shows the current temperature, set point and modes, and allows you
to manually control your furnace and air conditioner.
Using the Web Portal
The real power of the BAYweb Thermostat is realized by using the BAYweb Portal to access
your thermostat. This portal can be accessed anytime from anywhere via web browser and
Internet enabled mobile phone. Unlimited use of the portal is included at no charge.
If you have not already done so, setup your personalized portal by going to the web site
www.bayweb.com, register a new account, login and add a device (your thermostat). You will
need the serial number and key code that are on the front of this manual.
15
Indicators show
Indicators show
which modes are
which modes are
selected
selected
Press once to show
Press once to show
the current set point.
the current set point.
Press again to
Press again to
change.
change.
Press to select
Press to select
HEAT mode. If
HEAT mode. If
selected, press
selected, press
again to turn OFF.
again to turn OFF.
Press to change
Press to change
HOLD mode. If
HOLD mode. If
selected the
selected the
current set point
current set point
will be used
will be used
regardless of
regardless of
schedule.
schedule.
Current
Current
Temperature
Temperature
Press to select
Press to select
COOL mode. If
COOL mode. If
selected, press
selected, press
again to turn OFF.
again to turn OFF.
Press to change
Press to change
the FAN mode
the FAN mode
between AUTO
between AUTO
and ON.
and ON.