Owner`s manual

Your existing installation is should be

similar to this depiction.

You have a single thermostat cable

going between your wall mounted

thermostat and the furnace.

The cable contains from 2 to 5 wires of

different colors.

Your BAYweb Thermostat installation is shown below. The Control Module is mounted near

the furnace or air conditioner and is wired into the existing thermostat cable. The control

module is powered from a standard outlet.

The specific installation steps to replace your existing thermostat with the new BAYweb

Thermostat are shown in the remainder of the installation instructions. If you are installing the

thermostat with new equipment, the process will be similar except for removal of the old

equipment.

CAUTION: Be sure to review all of the installation steps before starting your

installation.

Thermostat Cable