Installation guide

Remote Annex 4000 Hardware Installation Guide
Appendix C Port Upgrade Instructions
C-2
Disassembly Instructions
Static electricity can damage contents; open only at a
static-free station.
The following instructions describe disassembling the Remote Annex
4000; these instructions assume that you are facing the unit’s rear
panel.
Figure C-1 illustrates the instructions.
These instructions assume that the Remote Annex 4000 has
only one SLC and that you are adding a second SLC for the
port upgrade.
1 Unplug the unit.
2 Disconnect all the cables.
3 Remove the dress panel cover by pulling it toward you (
Figure C-1).
Figure C-1. Removing the Dress Panel Cover
Dress Panel Cover