Technical data

Installing and Operating BayStack ARN Routers
1-28
114200-D Rev 00
1.
Turn on and configure the terminal, using the parameters in Table 1 -3
and the terminal user guide.
2.
Turn off the terminal.
3.
Insert the 9-pin receptacle end of the console cable into the ARN Console
connector.
4.
Attach the null modem crossover adapter to the 25-pin connector.
Insert the screw on the cable connector into the receptacle on the adapter
connector and tighten the screw (refer to Figure 1-20
on page 1-26).
5.
Attach the 25-pin receptacle connector on the combined cable and
adapter to the console host connector (Figure 1-22)
.
Figure 1-22. Connecting a Terminal Console to an ARN
Table 1-3. Console Parameters
Parameter Value
Baud Rate 9600
Data Bits 8
Stop Bits 1
Parity None
COMM
20 mA PR
KB
Console cable plus
null modem adapter
ARN0058A
U
L
U
L
100-240~
1.2A
50-60Hz
Console Modem
Redundant Power