Operating instructions

ManualsBrandsBay Networks ManualsComputer equipment6300

ADDRESSING SAFETY SYSTEMS WITH INTELLIGENCE

Fire Detection - Addressable

FEATURES & BENEFITS

• Cost Effective -

High specification interactive digital

addressable fire detection and alarm system,

providing a cost effective solution for small, medium

and large sized buildings and sites.

• Design Flexibility -

Up to 32 control panels, repeats and illuminated zonal

mimics can be networked enabling system design

and expansion to be easily achieved to suit the site

for economic wiring and operational convenience.

• Secure Network -

Wired as a loop, the network’s dual channel RS485

link ensures that no single fault will affect the system.

• Easy to Install -

An extensive range comprising Loop Powered Alarm

Sounders, Beacons, Interfaces, Manual Call Points

and Sensors can all be connected to the nearest

control panel using a single 2-core cable for each

of the high capacity Loops (up to 4), accommodating

up to 191 devices per Loop, 512 maximum per panel.

• Reduced False Alarms -

The Protec Algo-Tec

6000 interactive fire sensors

utilise advanced discriminating algorithms for

maximum reliability and immunity to false alarms.

• Enhanced Performance -

The Protec Algo-Tec

6000 sensors learn from

their environment, applying interactive decision

making algorithms to provide stability, threshold

compensation and optimised performance.

• Secure Detection Loops -

Many Protec Algo-Tec

6000 devices incorporate

built-in short circuit isolator units. These can be

located as required.

• Easy to Address -

‘FAST’ addressing (Firmware Addressed Secure

Technology) ELIMINATES troublesome and time

consuming setting of address cards and DIL switches.

• Devices Display Address Number -

‘RVAV’ Remote Visual Address Verification.

Confirmation of the correct location of each device

can be easily identified, using the devices in-built LED

to indicate the device address number.

• On Site Flexibility -

Configuration of all system functions is fully site

programmable.

• Reduced Maintenance Costs -

Early indication and reporting of sensors approaching

contamination level reduce false alarms and enable

dirty sensors to be cleaned or replaced.

• Optional RS232 Port -

Typically used to connect to a colour graphics

system, pager system or BMS interface. Allows PC

connection for backup and programming.

• Designed to EN 54-2 & 4

BUILDING 2

BUILDING 1

BUILDING 3

BUILDING

BUILDING 5A

BUILDING

230V ac

Up to 32 panels on a network

2 Core RS485

Secure Network

24V dc From Panel or P.S.U.

Colour Graphics System

Typical 6300 Network System