Specifications

9031561 E1 Application Views
4-5
ATM Application
ATM Application
This application provides access to ATM functionality for this device. The
model type for this application is CentATMApp. Table 4-1 describes each of
the application-specific Icon Subviews menu selections available for the ATM
application.
ATM Monitor
This menu selection contains the following sub selections:
ATM Port Statistics View
This view provides the following information:
Card
Displays the card index.
Port
Displays the port index.
Signal
This bit field indicates whether the port receives a signal from the remote
ATM port. A value of 1 = signal present and 2 = no signal present.
RX Bad HEC Cell
The number of cells received that have a bad ATM cell header (HEC). The
error is usually due to a physical layer problem. For example, when the fiber
is first connected to the system or a clock mismatch.
Table 4-1. CentATMApp Icon Subviews Menu
Menu Description
ATM Configuration Opens four sub menu selections described in Chapter 3,
ConfigurationViews.
ATM Monitor Contains three sub selections: the ATM Port Statistics view,
described in Chapter 3, Configuration Views, the ATM
ELAN PVC Statistics view, described on page 4-6, and the
ATM PVC Status view, described on page 4-6.
Model Information Opens the Model Information View, refer to SPECTRUM
Views.