Technical data

Using Local Boot (the Quick-Start Procedure)
116273-B Rev 00
B-7
3 Enter IP address in dotted
decimal notation:
Enter the IP address for the COM
interface.
Enter IP subnetwork mask in
dotted decimal notation:
Enter the subnetwork mask for
the COM interface IP address.
Is the router connected to
the same local area network
as the Site Manager
workstation?
(y/n) [n]:
y(es)
n(o)
Press the Return
key.
Enter routing protocol
number [1]:
1. RIP
2. OSPF
3. Static Route to Site Manager
(Complete the
worksheet for the
protocol you
select.)
Enter wide area protocol
number [1]:
1. Bay Networks Point-to-Point
Protocol (Proprietary)
2. Frame Relay
3. Point-to-Point Protocol (PPP)
Standard
4. Switched Multimegabit Data
Service (SMDS)
(Complete the
worksheet for the
protocol you
select.)
Do you wish to set
SNMP community
management?
(y/n) [n]:
y(es)
n(o)
Setting up SNMP community
management is optional.
4 Enter (TFTP) volume number
[1]:
The script automatically selects
“1” as the TFTP default volume.
None
5 Do you want to enable
FTP? (y/n) [n]:
y(es)
n(o)
Enabling FTP is optional.
Enter (FTP) volume number
[1]:
The script automatically selects
“1” as the FTP default volume.
(continued)
Global Information Worksheet (continued)
Step Requested Information Options Your Response