User manual

Nortel Switch User Authentication
Technical Configuration Guide v1.0 NN48500-589
IDE Step 17 – For this example, we are simply going to look for the read-write-all-access
user-id. From Attribute Category, select User and scroll down and select user-id. Select
Equal To with Format of None and enter the read-only-access user id, i.e. 8600rwa as used
in this example, in the Static Value window as shown below. Click on OK when done
___________________________________________________________________________________________________________________________
Nortel Confidential Information Copyright © 2009 Nortel Networks. All Rights Reserved.
External Distribution
38