User manual

Nortel Switch User Authentication

Technical Configuration Guide v1.0 NN48500-589

2.2.2 IDE Setup

2.2.2.1 Configure Outbound attributes to deny ERS8600 CLI commands

Using the same base configuration from the previous step, we will simple add the CLI commands

we wish to deny to the read-write user. In this example, this will apply only to the user 8600rw.

IDE Step 1 – IDE already has the vendor specific attributes defined, Bay Networks vendor

code 1584 using attribute types 194 and 195 for the ERS8600 which can be viewed by

going to Site Configuration -> Provisioning -> Vendors/VSAs -> Bay-Networks -> VSA

Definitions.

IDE Step 2 – Go to Site Configuration -> Provisioning -> Outbound Attributes -> New

___________________________________________________________________________________________________________________________

External Distribution