User manual

Nortel Switch User Authentication
Technical Configuration Guide v1.0 NN48500-589
3.2 IDE Setup
3.2.1 Configure an Outbound Attribute on Ignition Server for Service-Type
The following chart displays the outbound attribute values required by the ERS5600, ERS5500,
ERS4500, or ERS2500 for each access level using RADIUS attribute type 6 (Service-Type).
Registry Value Description ERS Access Level
6 Administrative Read-Write-All-Access
7 NAS Prompt Read-Only-Access
IDE Step 1 – Go to Site Configuration -> Provisioning -> Outbound Attributes -> New
___________________________________________________________________________________________________________________________
Nortel Confidential Information Copyright © 2009 Nortel Networks. All Rights Reserved.
External Distribution
63