- Bay Ethernet Switche User Manual

Index-4 893-01010-A
R
rack mount caution, xxi
rack mounting, 2-5
requirements
console terminal
, 2-12
power cords, 1-9
Reset System option, 3-17
Reset to Default option, 3-17
RJ-45 connector pinout, 1-5
root cost, 3-9
Root port, 3-8
RS-232 console port, 3-22
Rx Align Error Frame, 3-10
Rx CRC Error Frame, 3-11
Rx Frame Too Long, 3-11
Rx Good Frame, 3-10
S
safety alert messages, xvii
screens
central screen area
, 3-4
command/response line, 3-5
descriptions, 3-5 to 3-17
hierarchy, 3-2
navigation commands area, 3-4
parts of, 3-3
Port Statistics and Status Information, 3-10
Power Up Self Test, 3-23
Spanning Tree General Information, 3-8
Spanning Tree Port Information, 3-10
Switch Information, 3-7
System Information, 3-7
using, 3-1
segment switching, 3-18
serial I/O connection, 3-22
SNMP
Configuration menu
, 3-16
management, 3-21
network management with, 3-20
SNMP Read Community String parameter, 3-16
SNMP Read/Write Community String parameter, 3-16
software upgrades and enhancements, 3-23
Spanning Tree
aging time parameter
, 3-15
Bridge Forward Delay parameter, 3-15
Bridge Hello Time parameter, 3-15
Bridge Max Age Time parameter, 3-15
Bridge Priority parameter, 3-15
enable/disable, 3-13
General Configuration menu, 3-15
General Information screen, 3-8
Port Configuration menu, 3-15
Port Information screen, 3-10
protocol definition, 3-19
specifications, technical, A-1
stacking switches, 2-3
standards supported, A-1
status area of menu/screen, 3-4
Status LED, 1-7
subnet mask, 2-20
switch
autonegotiation
, 4-2
configuration, 1-2
configuration examples, 3-17
desktop switch, used as, 3-19
initial setup, 2-17
managing, 3-20
rack mounting, 2-5
segment switch, used as, 3-18
stacking, 2-3
status area, 3-4
troubleshooting, 4-1
Switch Information screen, 3-7
Switch Network Configuration menu, 2-19, 3-13
Switch Software Upgrade menu, 3-25
System Configuration menu, 2-18, 3-12
system fault status LED, 1-8
System Information screen, 3-7
89301010.BK Page 4 Tuesday, June 10, 1997 8:00 PM