- Bay Technical Associates, Inc. OWNER'S MANUAL DATA SWITCH/POWER CONTROL DS2-RPC DS4-RPC, DS71 DS71-MD2 DS74, DS73

DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
45
From the configuration menu, select #9,
“DCD Logon/Logoff,” followed by <cr>.
The DS-series module displays the current
DCD Logon/Logoff status and asks if you
want to change: DCD logon/logoff factory
default is enabled:
DCD Logon/Logoff mode is................. Enabled
Enable ? (Y/N, CR for no change) :
Type “Y“ for yes followed by <cr>. Type
“N” for no followed by <cr>. Type <cr> for
no change.
LOCAL MODEM SETUP The DS71-MD2 has an internal 14.4K bps
DS71-MD2 ONLY) modem. Programmable modem
characteristics include number of rings to
answer, modem to modem Xon/Xoff
handshaking, amount of inactivity before the
modem automatically disconnects
(connectivity time-out), and the escape
character used to tell the modem the
information you are sending is a command
and not data (command mode).
From the configuration menu, select #9,
“Local Modem Setup,” followed by <cr>.
The following Local Modem Setup menu
appears:
Local Modem Setup:
Rings to Answer......…..............................1
Modem to Modem Xon/Xoff....................2
Connectivity Time-Out.............................3
Escape Character........…..........................4
Exit..................................….......................X
Enter Request: