Specifications

U140A135-00 2
Unit Configuration
At the prompt, type the number associated with the module you want to access, followed by a <CR>. You
will be taken to the module’s configuration window where you will be able to edit any of the information as
shown in Figure 3. The following pages define each line of the configuration menu.
Figure 3
Status
Used to view the status of the installed modules, modem setup, login setup, assigned user ports and
associated information by issuing a series of carriage returns.
Serial Port Configuration
DS-Series host modules translate data for devices using different serial configurations as shown in Figure
4.
The Baud Rate, Word Size, Stop Bits, and Parity can all be configured through the serial port using the
self-explaining menus. Xon/Xoff, RTS Line Driver, and DTR Line Driver cannot be configured using the
serial port; they must be configured using the phone line. The factory default settings are 9600bps, 8 data
bits, no parity, one stop bit, Xon/Xoff and DTR low.
Figure 4
Port Device Name
Select the port you want to rename, followed by a <CR>. Type the name you want to associate with the
port as shown in Figure 5.
Figure 5