Use and Care Manual

DIRECTIONS FOR USE (cont'd) DIRECTIONS FOR USE (cont'd)
HOW
TO USE
(cont'd)
FOR BEST
RESULTS
Spray when weeds are small and actively growing when
temperatures are above 60˚ F and when it’s sunny.
Disturbing the weed prevention barrier may reduce the
eectiveness of this product.
Rain or watering 30 minutes after application will not
wash away eectiveness.
Under drought conditions, it may be necessary to water the
product in. Spray with water to move the residual herbicide
into the soil and do not irrigate to the point of visible runo.
REPLANTING
Ornamental bedding plants (annuals, perennials), trees,
shrubs, sod & seed may be planted 6 months after
application.
This bottle may be relled when empty.
Relling the sprayer:
1. Open rell port cap.
2. Add 8 . oz. (16 TBS) of Bayer Advanced™ DuraZone™
Concentrate Weed & Grass Killer to sprayer bottle.
3. Fill sprayer bottle with water to 1 gal. ll line, replace rell
port cap, tighten and shake well.
HOW IT
WORKS
REFILL
This product contains a proven blend of weed & grass killers to
kill existing weeds & grasses plus a proprietary residual
herbicide to keep new ones from coming back. Existing weeds
& grasses begin to wilt & die within hours and new ones will
not grow for up to 6 months.
Do not apply this product in a way that will contact any person
or pet, either directly or through drift. Keep people and pets
out of the area during application. Do not allow people or
pets to enter the treated area until sprays have dried.
PESTICIDE
STORAGE
PESTICIDE
DISPOSAL
Store in original container in a cool, dry place, out of the
reach of children, preferably a locked storage cabinet.
Protect from freezing.
STORAGE AND DISPOSAL
PRECAUTIONARY STATEMENTS
ENVIRONMENTAL HAZARDS
If empty: Non-rellable container. Do not reuse or rell
this container, EXCEPT to rell with Bayer Advanced™
DuraZone™ Concentrate Weed & Grass Killer. Place in
trash or oer for recycling if available.
If partly lled: Call your local solid waste agency or toll
free 1-877-229-3724 for disposal instructions. Never place
unused product down any indoor or outdoor drain.
This product is toxic to sh, aquatic invertebrates, and plants.
To protect the environment, do not allow pesticide to enter or run o
into storm drains, drainage ditches, gutters or surface waters. Applying
this product in calm weather when rain is not predicted for the next
24 hours will help to ensure that wind or rain does not blow or wash
pesticide o the treatment area.
This chemical has properties and characteristics associated with
chemicals detected in groundwater. This chemical may leach into
ground water if used in areas where soils are permeable, particularly
where the water table is shallow.
This pesticide may impact water quality due to runo of rain water.
This is especially true for poorly draining soils and soils with shallow
ground water. This product is classied as having a high potential
for reaching surface water via runo for several months or more
after application.
1. Sprayer Set Up: (cont’d)
Option to Extend Sprayer Wand:
Remove desired sprayer wand
extensions from sprayer.
Disconnect sprayer wand tip from sprayer.
Attach sprayer tip to extensions.
Tighten all ttings.
2. To Spray:
Turn pump handle to release from locked position.
Pump the sprayer approximately 15-20 times
until the pump is primed.
Compress and return pump handle to
locked position.
Begin spraying by pushing the lever on
the spray handle down.
Select the desired spray pattern by rotating the nozzle
at the tip of the wand.
For continuous spraying, slide the spray lever forward
to lock position and
pull back to release.
3. To relieve pressure when nished spraying:
Turn the cap on the
pressure relief valve
clockwise.
4. To store:
Remove extensions from sprayer wand and return to
sprayer unit.
Reattach original wand and return hose into storage
compartment.
Secure wand to retaining clip.
(continued)