MSDS

Bayer Environmental Science
Material Safety Data Sheet
MSDS Number: 102000012315
BAYER ADVANCED BRUSH KILLER PLUS
CONCENTRATE
MSDS Version 2.0
Page 3 of 7
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
Keep unauthorized people away. Isolate hazard area. Avoid contact with spilled
product or contaminated surfaces.
Methods for Cleaning Up
Take up with absorbent material (e.g. sand, diatomaceous earth or a proprietary
absorbent material). Collect and transfer the product into a properly labelled and
tightly closed container. Clean contaminated floors and objects thoroughly,
observing environmental regulations.
Additional Advice
Use personal protective equipment. Do not allow product to contact vegetation.
SECTION 7. HANDLING AND STORAGE
Handling Procedures
Handle and open container in a manner as to prevent spillage.
Storing Procedures
Keep tightly closed in a dry and cool place. Store in original container and out of
the reach of children, preferably in a locked storage area.
Do not freeze.
Min/Max Storage
Temperatures
Do not transport or store below 0 °C / 32 °F
Do not transport or store above 38 °C / 100 °F
The 30-day storage temperature average must not exceed the recommended
maximum.
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
General Protection
There are no known hazards associated with this product when used according
to the label directions. The following guidelines should be followed.
Avoid inhalation of vapour or mist. Avoid contact with skin and eyes.
Wash hands thoroughly with soap and water after handling and before eating,
drinking, chewing gum, using tobacco, using the toilet or applying cosmetics.
Do not allow children or pets to enter the treated area until it has dried.
Hand Protection
Chemical resistant nitrile rubber gloves
Body Protection
Wear long-sleeved shirt and long pants and shoes plus socks.
Exposure Limits
Ethanol 64-17-5 ACGIH TWA 1,000 ppm
NIOSH REL 1,000 ppm 1,900 mg/m3