User guide

TESTING

Need Help? 1-800-268-7200

www.diabetes.bayer.ca

If the first blood drop is not enough, the meter may

beep twice and display a strip underfill screen

image .

You have 20 seconds to apply more blood onto the

same strip. If you are not able to provide enough blood

within that time, an E2 error code will be displayed.

Dispose of the used test strip as medical waste and

start over with a new strip.

Testing Your Blood

1. Press the lancing

device firmly against

the puncture site and

press the release

button.

Getting the Blood Drop and Testing

2. Stroke your hand and

finger towards the

puncture site to form a

drop of blood. Do not

squeeze around the

puncture site.

3. Test immediately after

a good blood drop

has formed.

Suggested drop size

4. Immediately touch the tip of

the test strip to the drop of

blood. The blood is pulled

into the test strip through

the tip.

Do not press the tip

against the skin or

place the blood on top

of the test strip or you

could get inaccurate

results or errors.

Fingertip

Testing

Hold the tip of the test strip

in the blood drop until the

meter beeps.

84194050_CntrNextEZ_UG_ENca_FpBp_v1.indd 10-1184194050_CntrNextEZ_UG_ENca_FpBp_v1.indd 10-11 7/8/14 11:37 AM7/8/14 11:37 AM