Specifications

Chapter 7: Deck Equipment 160, 180, & 184 • Owner’s Manual Supplement
28
Canvas (If Equipped)
160 Bimini Top (If Equipped)
1. Insert the end eyes of the main bow
(A) into the middle deck hinges
(B) and insert the securing pins.
2. Unfold the canvas and insert the
end eyes of the forward braces (C)
into the forward deck hinges (D)
and insert the securing pins.
3. Insert the end eyes of the aft braces
(E) into the aft deck hinges (F) and
insert the securing pins.
• The jaw slides (G) should not need
to be adjusted.
• If you decide to adjust the jaw slide
positions, obtain the correct mea-
surements from your selling dealer.
160 Convertible Top (If Equipped)
1. Insert the end eyes of the main bow
(A) into the forward deck hinges
(B) and insert the securing pins.
2. Unfold the canvas top and snap the
front edge of the top to the top of
the windshield frame (C).
3. Insert the end eyes of the aft braces
(D) into the aft deck hinges (E) and
insert the securing pins.
4. Align the secondary bow (F) with
the center seam (G) of the canvas
by loosening or tightening the top
straps (H).
• The jaw slides (I) should not need to
be adjusted.
• If you decide to adjust the jaw slide
positions, obtain the correct measure-
ments from your selling dealer.
• If other canvas (i.e. side curtains or
slant back cover) is installed, the can-
vas top may need adjustment to align
the snaps on the canvas with the
snaps on the boat.
PRODUCT or PROPERTY DAMAGE HAZARD!
Take down and securely stow ALL canvas before transporting your boat by road.
CAUTION
!
A
B
C
D
E
F
G
G
SECURING PIN
DECK HINGE
END EYE
NOTE: YOUR DECK HINGES & JAW
SLIDES MAY BE STAINLESS STEEL
SECURING PIN
H
DECK HINGE
END EYE
F G
A
I
D
B
E
C
F
NOTE: YOUR DECK HINGES & JAW SLIDES MAY BE STAINLESS STEEL