Specifications

185, 195, 205, & 225 • Owner’s Manual Supplement Chapter 7: Deck Equipment
43
Canvas (If Equipped)
Convertible Top
1. Unzip, remove, and stow the storage boot.
2. Slide the windshield hinges of the main bow (A) over the pre-drilled hole on each side windshield frame (B) and
secure with the pins.
3. Insert the end eyes of the aft braces (C) into the deck hinges and secure them with the pins.
4. Unfold the canvas top and snap the front edge of the top (D) to the windshield frame.
5. Align the secondary bow (E) with the center seam of the canvas by loosening or tightening the top straps.
6. No adjustments to the jaw slides (F) should be needed as they are preset during manufacturing. Before attempt-
ing to adjust the jaw slide positions, obtain the correct measurements from your selling dealer.
7. If additional canvas (i.e. side curtains or slant back cover) is installed, the canvas top may need readjustment to
align the snaps on the canvas with the snaps on the boat.
PRODUCT or PROPERTY DAMAGE HAZARD!
Take down and securely stow the canvas top or bimini top, side curtains, and slant back cover
before transporting your boat by road.
CAUTION
!
Two people are needed to do the tasks listed below and on the following pages in this section.
NOTICE
D
C
F
E
A
B
END
EYE
DECK
HINGE
SECURING PIN
SECURING PIN WINDSHIELD HINGE