Specifications

Chapter 7: Deck Equipment Classic Runabouts • Owner’s Manual Supplement
42
210 & 215 Convertible Top
1. Slide the windshield hinges of the
main bow (A) over the pre-drilled
holes (B) in the windshield frames
and insert the securing pins.
2. Unfold the canvas top and snap
the front edge of the top to the
windshield frame (C).
3. Insert the end eyes of the aft braces
(D) into the deck hinges (E) and
insert the securing pins.
4. Align the secondary bow (F) with
the center seam (G) of the canvas
by loosening or tightening the top
straps (H).
• The jaw slides (I) should not need to
be adjusted.
• If you decide to adjust the jaw slide
positions, obtain the correct measure-
ments from your selling dealer.
215 Bimini Top (If Equipped)
1. Slide the windshield hinges of the main bow
(A) over the aft pre-drilled holes (B) in the
windshield frames and insert the securing pins.
2. Unfold the canvas and slide the windshield
hinges of the forward braces (C) over the for-
ward pre-drilled holes (D) in the windshield
frames and insert the securing pins.
3. Insert the end eyes of the aft braces (E) into the
aft deck hinges (F) and insert the securing pins.
• The jaw slides (G) should not need to be adjusted.
• If you decide to adjust the jaw slide positions,
obtain the correct measurements from your
selling dealer.
C
A
I
B
D
WINDSHIELD SECURING
HINGE PIN
E
HF G
SECURING PIN
DECK HINGE
END EYE
A
B
E
F
C
D
G
G
SECURING PIN
DECK HINGE
END EYE
WINDSHIELD SECURING
HINGE PIN