Specifications
Table Of Contents
- ChapTER 1: ABOUT THIS MANUAL
- CHAPTER 2: PRODUCT SPECIFICATIONS
- ChapTER 3: COMPONENTS/sYSTEMS
- Electrical System (12Volt DC)
- Fuses and/or Circuit Breakers
- Dash Programming (1952BV only)
- Controls
- Navigation and Interior Lights
- Compass
- Depth Finder
- Bow Mount For Trolling Motor-1804PC and 1954CW
- Anchoring
- Ski Tow Ring
- Ski Pylon (outboard models)
- Hull Exterior Drains & Hardware
- Quick Oil Drain System
- Fuel System
- Bilge Blower
- Live Well System
- Bilge Pump
- Jump Seat to Sunlounge Conversion
- Sleeper Seat Adjustment
- Removable Fishing Seats (1804PC and 1954CW)
- Canvas Top (Option) Installation
- Canvas Stowage
- ChapTER 4: Wiring Diagrams
- Appendix A: BAYLINER CAPRI LIMITED WARRANTY

22 CHAPTER 3: COMPONENTS/SYSTEMS
Capri 16’ - 19’ • Owner’s Manual Supplement
Quick Oil Drain System
All stern drive models are equipped with a quick oil drain system.
To drain the engine oil:
1. Remove the boat from the water.
2. Unscrew the garboard drain plug.
3. Pull the draw cord until the oil drain plug and the oil drain hose slide out of the
garboard drain.
4. Place the end of the oil drain hose into a suitable container.
5. Unscrew the oil drain plug and drain the engine oil.
6. Replace the oil drain plug.
7. Push the drain hose back into the bilge.
8. Replace the garboard drain plug.
Always dispose of waste oil in accordance with local regulations.
QUICK OIL DRAIN SYSTEM
GARBOARD
DRAW
OIL DRAIN PLUG
OIL DRAIN HOSE
ENGINE OIL PAN
TRANSOM
DRAIN PLUG
CORD
GARBOARD
DRAIN
BILGE