MODEL # 200-480 200-490 LP GAS TURKEY FRYER KIT OWNER’S MANUAL SAFETY ALERTS, ASSEMBLY & OPERATING INSTRUCTIONS GENERAL MAINTENANCE & STORAGE KEEP THIS MANUAL FOR FUTURE REFERENCE NOT FOR COMMERCIAL USE This Instruction Manual contains important information necessary for the proper assembly and safe use of the appliance. You must carefully read and follow all warnings and instructions before assembling and using the appliance. Follow all warnings and instructions when using the appliance.
SAFETY DANGER Not following these instructions will most certainly result in fire or explosion which will cause property damage, personal injury, or death. WARNING Hazard or unsafe practices could result in severe property damages, personal injury, or death. CAUTION Hazard or unsafe practices possibly resulting in minor property damages, personal injury, or death. DANGER IF YOU SMELL GAS: • Shut off gas to the appliance. • Extinguish any open flame. • Open Lid.
WARNING • Sober adult operation ONLY! The use of alcohol, prescription or non-prescription drugs may impair ability to properly assemble or safely operate appliance. • Do not use appliance for anything other than its intended purpose. • This appliance is for OUTDOOR USE ONLY, and shall not be used in a building, garage or any other enclosed area. • Do not use appliance on or under any apartment or condominium balcony or deck. For more details, see instructions for placement of cooker in this manual.
SAFETY SYMBOLS WARRANTY Barbour International, Inc. (“Vendor”) warrants to the original retail purchaser of this appliance and no other person, that if this appliance is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in such appliance shall be free from defects in material and workmanship. Vendor may require reasonable proof of your date of purchase from an authorized retailer or distributor.
ABOUT THIS PRODUCT This gas appliance has greater heat output than traditional kitchen stoves. It can be referred to as a cooker, fryer, or appliance in this manual. The appliance is designed to work with a cooking vessel (pot). The appliance is only designed to work with the hose and regulator supplied with this product. This product is designed for cooking food. In addition to regular cooking, this appliance is specifically designed for deep frying whole turkeys or chickens.
ASSEMBLY INSTRUCTIONS Carefully assemble this appliance according to these instructions. Inspect contents in the box to ensure all parts are included and undamaged. Please contact Barbour International, Inc. if any parts appear damaged, missing, or inaccurate. Proof of purchase will be required.
5. Return frame assembly to upright position and fully tighten leg bolts with a wrench. 6. Attach Hose to Burner: It is important to properly connect the orifice to the burner. The male hose connector with orifice will screw directly into the burner. To attach, hold the air shutter up against the end of the burner. Place the small end of the spring onto the male connector, and insert into threaded hole of the burner.
LIQUID PROPANE (LP) CYLINDER This appliance is designed to only operate using Liquid Propane (LP) gas in a self-contained gas supply system (tank). The LP cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders, U.S. Department of Transportation (DOT) or the Standard for Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods, CAN/CSA-B339.
These features and specifications for the LP Cylinder MUST be present. If you exchange the LP cylinder, make sure the new tank also complies with all the specifications listed here: LP Cylinder Valve (Trilobular Handwheel indicates OPD is present) 9.1 Kg/20 lbs capacity; 31.75cm/12.5-in diameter x 45.72cm/18-in tall Type-1 gas cylinder valve outlet to accommodate the hose and regulator supplied with this appliance. The Type-1 valve must prevent gas flow until a positive seal is obtained.
HOSE & REGULATOR The Hose Valve Regulator (HVR) supplied with this appliance is an independently CSA certified product. It is designed to connect the appliance to a 9.1 Kg/20 lbs LP Cylinder. Read and follow all instructions and warnings on the supply hose safety tags. Clean and inspect the HVR before each use of the appliance. If there is evidence of abrasion, wear, cuts or leaks, the HVR must be replaced prior to the appliance being put into operation.
THERMOMETER The thermometer included with this appliance is a sensitive measurement device. It is designed to attach to a cooking vessel and register liquid temperature. If there is evidence that the thermometer has been dropped, bent, or twisted, it must be replaced prior to the appliance being put into operation. If the thermometer supplied with this appliance has been lost or damaged, contact Barbour International, Inc. for a replacement. Replace only with Model #5025.
GAS LEAK TEST When to test for gas leaks: • After assembling your cooker and before lighting for the first time, even if purchased fully assembled. • Every time the LP gas cylinder is refilled, or if any of the gas components are replaced. • Any time your cooker has been moved. • At least once per year or if your cooker has not been used for more than 60 days. NOTE: The gas leak test must be performed in an area that has adequate lighting in order to see if bubbles are developing.
PLACEMENT OF COOKER DANGER • This appliance is portable and should not be installed into cabinetry or any other enclosed casing. Any placement or installation of the appliance must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Storage and Handling of Liquified Petroleum Gases, ANSI/NFPA 58; or Natural Gas and Propane Installation Code, CSA B149.1; Propane Storage and Handling, CSA B149.2.
LIGHTING INSTRUCTIONS Follow these instructions for safe and proper lighting and re-lighting of the appliance. CAUTION • The Regulator supplied with this appliance is equipped with a Gas Flow Limiting Device that will greatly restrict the flow of gas if activated by a rapid release of gas. Reference Trouble-Shooting Tips if flame ever appears weak. • If the appliance does not light after 2 or 3 attempts, turn OFF gas supply.
Flame 4a. Alternative Lighting: It is possible to light this appliance with a Spreader standard paper book match. To light: A. BEFORE turning on (open) the Control Knob, strike the paper book match and place it in the cup of the burner with the (hand away flame of the match over the serrated edge of the flame from burner) spreader. B. Remove hand a safe distance from the burner. C. Turn on (open) the Control Knob. The burner should light in less than 5 seconds. 5.
Hang regulator • Remove batteries from product after each use to prevent corrosion to frame with or leaking. wire hook • Always turn off (close) the gas supply and disconnect the hose and regulator from the LP cylinder to move or store. • To avoid damage to the regulator, use the wire hook provided to hang regulator on the appliance frame any time the hose is not connected to the LP Cylinder. • Store appliance in a dry place.