Owner`s manual

8
ASSEMBLY INSTRUCTIONS
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR
OPERATING YOUR COOKER. Inspect contents in the box to ensure all parts are included and undamaged.
FOR MISSING PARTS OR ASSISTANCE, PLEASE CALL 1-800-864-6194 M-F 8am - 5pm CST.
Proof of purchase will be required.
TOOLS REQUIRED:
Adjustable Wrench
PARTS INCLUDED:
COOKER ASSEMBLY
TOOLS REQUIRED:
Adjustable Wrench
PARTS INCLUDED:
ASSEMBLED UNIT
COOKER ASSEMBLY
Philips Screwdriver
1 - Long Bolt
1 - Nut
1- Regulator
Hose Assembly
1- Heat Sheild
1- Frame
SP40
1- Frame
1 - Long Bolt
1 - Nut
1- Regulator
Hose Assembly
1- Heat Sheild
ASSEMBLED UNIT
SP2
1. Remove components from the box and packing.
2. Attach Hose to Orifice Bar
- Screw Hose on to end of Orifice Bar.
Wrench tighten.
Refer to Connecting Regulator Hose Assembly to Cooker on page 11.
3. Attach Hose Guard to Cooker - Line up hole on Hose Guard
with hole on Support Bar. Attach using Hex Bolt and Nut.
Use Wrench to tighten.
Turn CLOCKWISE
W
rench Tighten
Orifice Bar
from SP1
Jet Cooker
Philips Screwdriver
1. Remove components from the box and packing.
2. Attach Hose to Orifice Bar
- Screw Hose on to end of Orifice Bar.
Wrench tighten.
Refer to Connecting Regulator Hose Assembly to Cooker on page 11.
3. Attach Hose Guard to Cooker - Line up hole on Hose Guard
with hole on Support Bar. Attach using Hex Bolt and Nut.
Use Wrench to tighten.
Turn CLOCKWISE
W
rench Tighten
Orifice Bar
from SP1
Jet Cooker
18" WIDE
22" WIDE