Owner`s manual

102
APPENDIX B
MSHELL MESSAGE SUMMARY
MSHELL STANDARD MESSAGE SUMMARY
Message Description
Remote Connection Lost This message is displayed when the connection with
the modem is terminated abruptly (e.g., if the print
server unit loses power).
Remote Connection Closed This message is displayed when the connection is
terminated.
Dial Call Processing This message is displayed when an incoming call is
detected.
Opening Connection with Remote
Location
This message is displayed using dial-in operation
while MSHELL attempts to establish a connection
between a remote user calling in and the Print Server
Plus.
Remote Connection Established This message is displayed after a successful
connection is made with the Print Server Plus.
Remote Connection Terminated This message is displayed when a user terminates the
connection with the modem in a normal fashion (e.g.,
MCLOSE).
Error in SAP process\n\rRestart system This message is displayed when the SAP (Service
Advertising Packet) was aborted while doing dial-in
communication.
Connection to xxxx presently in Use
\r\nDisconnect Connection prior to
enabling Dial In Service
This message is displayed using dial-out
communication when a user requests a virtual
connection to a modem port while a connection
already exists.
Dial In Service Active This message is displayed when a workstation starts
advertising as a dial-in workstation.
Error enabling Dial In Service This message is displayed when an error occurs trying
to get a workstation to advertise for dial-in operation.
Dial In Service Already Active! This message is displayed when an advertising
workstation has a connection with a remote user and
another dial-in attempt is made.
Connection already active! This message is displayed when a user instructs a
workstation to advertise for dial-in operation while the
workstation is already connected for dial-out
operation.
Close Dial In before Dialing out! This message is displayed when a user on an
advertising workstation for dial-in operation attempts