Owner`s manual


SPECIFICATIONS
*PERIPHERAL INTERFACE:
Serial Ports:
EIA-232 (CCITT V.24), -5v mark, +5v
space or EIA-422, -5 to +5 volt differential (TX+,
TX-, RX+, RX-). Hardware (jumper) selectable.
Parallel Ports:
Centronics compatible.
NETWORK INTERFACE:
Ethernet - 10BASE2 (thin coax)
or 10BASE-T (twisted pair), IEEE 802.3 compliant.
Token Ring: IEEE 802.5 compliant.
NOTE:
If you have a 10BASE2 or 10BASE-T unit and
your network uses a frame type other than 802.3 (e.g.,
Ethernet II or SNAP), please see the
IMPORTANT
statement in
Section 5.1
(Network Interface).
NETWORK OPERATING SYSTEM COMPATIBILITY:
Netware V3.XX and V4.XX.
PERIPHERAL PORT HANDSHAKING*:
CTS/DTR
(EIA-232) or HSI/HSO (EIA-422); selectable XON/XOFF.
CONNECTORS:
Network Port:
Thin coax - BNC type;
Twisted pair - RJ-45
Token Ring - DB-9F (STP) or RJ-45 (UTP).
Peripheral Ports*:
Serial - RJ-45;
Parallel - DB-25F.
*
- Not applicable to the PS-MIO