Owner`s manual

36

PRINT SERVER SOFTWARE - PSQMGR
The utility software provided with your print server includes a menu-
driven configuration program (PSQMGR). Please see
Section 7.1
through
Section 7.6
for detailed information on PSQMGR.
Section
7.7
discusses quick installation using PSQMGR. A command line
version of PSQMGR (BCON.EXE) is provided allowing you to
perform some basic PSQMGR functions from a DOS prompt. You
may configure the BayTech print server name, serial printer port
configuration, virtual circuit connection, line delay, and update
operation mode with BCON.EXE (see
Section 7.8
).
NOTE:
If you are adding your BayTech print server to the network
using PSQMGR, proceed to
Section 7.7
(Quick BayTech Print
Server Installation Using PSQMGR) for step by step instructions. If
you have already added the unit to the network and assigned print
queues to it using PCONSOLE, you may wish to use BCON.EXE to
make any desired changes to the print server parameters.

GENERAL INFORMATION
PSQMGR is a menu-driven general print server management utility
which is also used to configure the BayTech print server. On any
BayTech print server, you may change such items as the print
server name, the parameters of serial printer ports, the queue
service interval, and the update operation mode. In addition to
programming these unique features for the BayTech print server,
PSQMGR may be used to perform the same print server
management functions as Novell PCONSOLE (i.e., install any print
server, set printer configuration, assign print queues, etc.).
PSQMGR will automatically determine all file servers, print servers,
and print queues on the network when it is executed and will
update such information as printer configuration and queue files on
the selected file servers. You may view this information on either a
file server or print server basis. This data may be accessed by the
PCONSOLE utility if required.